Chevrolet spark 2012
Thank you, it's been corrected!I'm assuming that you actually mean vinyl. That has been "spelled" wrong since we started laying it on floors over here.
Thank you, it's been corrected!
English isn't my native language and i've just recently been introduced to the material
So what do you say, care to help me out with my interior removal problem?
Wow thank you very much for that thorough answer! Will updtae with before and after!Yoavdude, Trim removal is like a mystery tour. There are 'fixings/clips' all over the place, many of which are designed to be pretty much 'one way' !
It is almost inevitable that you will probably break/snap some lugs off. On things like door trim look for 'hidden' screws under cover caps.
Importantly - purchase a set of trim removal tools these may assist with leverage. Do not use a screwdriver to 'lever' as this will damage the surrounding trim edges.
Excuse me saying but the vehicle looks pretty scruffy and sections/panels removed will need thorough cleaning before any application. The slightest speck of dust/dirt under the film will look like a mountain! By the way, a gloss film will show every blemish, were as a matt film is much more forgiving to the eye. (Gloss film will also introduce 'glare' inside the cabin which is not good). Before and after photographs would be welcomed.
As a new member I've attached the following link which has some helpful Forum information. When you have a chance, go back to your Sign-Up and complete the World location and your Vehicle details in the designated sections which you left 'blank'.
Hi Forum Member, It is possible that you are new to the Chevrolet Forum and ended up here either by chance or a post has referred you here. Either way you are Welcome. As a new member (or even an older member) who is unfamiliar with the layout I've compiled some helpful tips below. Explore...www.chevroletownersclub.co.uk