Chevrolet Owners Club banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 2010 Matiz S 0.8 with 53000 on the clock - its been used a LOT! When I dip the clutch to the floor, in most cases, it stalled, which is somewhat of a hazard on roundabouts and stuff. Engine Management light came on intermittently then stopped coming on. Got code P0172. Replaced spark plug leads, no joy. Replaced MAP sensor, things are a little better now, the stalling only happens in the first four or five miles of each journey. This still isn't right - what happens now?

Any ideas would be really helpful!
 

·
Registered
Joined
·
2 Posts
hi mate i had the S reg daewoo matiz SEplus and the same problem occured on mine it turned out the clutch plate was burned out and the engine management was cutting the revs if there is anythin else u need 2 know just ask :)
 
1 - 3 of 3 Posts
Top