Chevrolet Owners Club banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi all looking to remove my factory fit stereo and fit an aftermarket an advice on ease of removal
Thanks
Danny
 

·
Registered
Joined
·
1 Posts
Remove trims around radio ( gently with flat screwdriver is ok ) and there will be srews underneath - unscrew and that's it.
 

·
Registered
Joined
·
30 Posts
If the stereo is held in by spring clips, you'll need a pair of DIN tools. Insert the DIN tools into the holes on eitter side of the unit until a click is heard. The tools serve to release the spring clips and also hook onto the sides of the stereo so that you can pull it out easily. Spread the tools apart slightly then pull the stereo out of the dash.
 
1 - 3 of 3 Posts
Top